1.KSPT series of printing ink is made of advanced imported acrylic resin and high grade pigment through fine grinding and grinding. The ideal effect can be achieved by free drying for 24 hours at room temperature more than 25 degrees. (except for 304 stainless steel / titanium alloy / anodic oxidation) most of the metal and plastic products can be dry without curing agent; emergency 60-120 Excellent adhesion can be obtained by 10 minutes of baking
2, suitable for: plastic, aluminum alloy, metal surface anodized surface and white iron sheet / ordinary stainless steel /ABS/ acrylic and other materials screen printing and pad printing
3、烘烤恒温： 低温60度/40分钟，高温 120度20分钟恒温烘烤，等产品冷却后可以做物理破坏检测
3, baking constant temperature: low temperature 60 degrees /40 minutes, high temperature 120 degrees 20 minutes constant temperature baking, and other products can be cooled after physical damage detection.
4, the method of printing ink: dilute the diluent about 5-10% to the press suitable for the viscosity and stirring evenly. According to the actual conditions at that time, the thinner is selected: fast drying, middle dry and slow dry thinner. In general, the fast drying agent is selected for cold weather (less than 15 degrees C), and the slow drying agent is selected in hot weather (> 30 degrees C).
5, color: 26 colors commonly used color, other special colors can be allocated; use period: one year, expired, please use carefully, plus other auxiliaries, the remaining ink can not be recycled.
6, do not mix with other types of ink, otherwise prone to other adhesion, chemical reaction and other bad phenomena.
1. the appearance of all kinds of printing materials is similar. It is necessary to confirm whether the materials of the substrate are in conformity with each other, and that the customers need to try them out first.
2. before printing, remove the dust and oil stains on the surface of the printing parts. It can be removed by alcohol or water to promote the effect of attachment. In the process of printing, some slow dry ointments can be properly added, such as drawing or dispersing.
3. without testing, the ink and other types of ink should not be mixed and collocated. If the ambient temperature is too low, the original quality of the ink will be affected.
4. pay attention to the humidity and humidity of the workshop, which will affect adhesion.
5. Attention should be paid to ventilation in the construction site when using. Try to avoid direct skin contact
6, this product splashes into the mouth, nose, eyes and ears, and applies a lot of water to clean or seek help from the doctor directly.
7. Allergic to this product should be coated with a skin cream or an impermeable glove before use.
8, according to climate change, please keep away from fire sources and store at 1 degrees -25 in the shade. Ink and diluent are strictly prohibited when using and storing.
The above color pulp is measured by the non medical standard of ROSH standard by SGS. The above information is recorded as the company's laboratory data, only for reference, no guarantee and commitment basis. Before large batch production, it is necessary to test the batch production according to the customer's requirements and do not comply with all the losses caused by the above operation methods. No responsibility!
俗称：万能油墨，自干金属油墨 metal from dry ink 金属自干油墨
Commonly known as universal ink, self drying metal ink metal from dry ink metal self drying ink.